¶ How to Maintain and Replace Beam Mirrors
This guide explains how to properly maintain, clean, inspect, and replace beam mirrors in your laser machine. Regular mirror maintenance ensures optimal laser transmission efficiency, stable cutting power, and extended optical component lifespan.
Neglecting beam mirror maintenance may lead to power loss, poor cutting performance, or optical damage.
¶ Required Tools
- M2, M3 hexagonal wrench
- Lens cleaning solution
- Dust-free swabs
¶ Operation Guide
¶ Disassembly of the Chassis
Using an M2 Allen wrench, carefully remove the screws and place them uniformly, following the instructions in the pictures.
Using an M2 Allen wrench, carefully remove the screws and place them uniformly, following the instructions in the pictures.
¶ Locate the Machine's Beam Splitter
¶ Maintenance Cleaning with Dust-free Swabs and Lens Cleaning Solution
Use cleaning solution sprayed on swabs and gently wipe the front and back of the lens with a damp cotton swab.
Use a dry cotton swab to clean the moisture from the lenses.
¶ Determining if a Lens is Good or Bad
Look for scorched black marks on the lenses and try to clean them.
|
|
|
| Normal lenses | Damaged lenses |
¶ Replacement of Combiner Lens
Use an M3 Allen wrench to loosen the two screws on the side of the holographic mirror bracket.
Unscrew and remove the screws and place them uniformly, remove the lens.
Reinstalling new lenses into the beam mirror holder.
Important Reminder:
If these steps do not resolve the issue, please submit a support ticket. A technician will then be able to conduct a more in-depth diagnosis.