¶ X Series Wiki
¶ Introduction
The OneLaser X Series is a powerful line of desktop laser engravers designed for makers, small businesses, and workshops. Whether you need fine detail or strong cutting power, these RF and CO2 laser engravers deliver.
 |
 |
¶ XRF Model |
¶ XT Model |
|
38W RF metal tube laser for sharp, precise engraving with long lifespan and instant startup, ideal for detailed work. |
55W CO₂ glass tube laser for powerful cutting on thicker materials — an affordable, high-performance choice. |
¶ Set Up
- How to connect the Air Purifier
- Unboxing the X Series
- How to Install the Base for X Series
- Connect XT&XRF to LightBurn via Ethernet
- Connect XT&XRF to LightBurn via WiFi
- Connect XT&XRF to LightBurn via USB Cable
- The First Time to Run the Machine
- Touchscreen Alarm Guide for X Series
¶ Quick Start
- X Series Unified User's Manual
- X Series Glossary
- Tool Bag Included Parts
- Material Test Tool
- Lightburn Software
¶ Troubleshooting
¶ Motion & Homing
Focuses on resolving issues where the machine is stationary or moving incorrectly.
- X-axis or Y-axis cannot move - X Series
- Laser head stops moving - X Series
- Reset failed: laser head constantly crashing into the origin - X Series
- Failure to home or XY axis overspeeds after rotary use - X series
- Z-Axis dropping down and cannot be raised with control button - X Series
- Axis driver indicator light is red and flashing - X Series
¶ Processing Quality & Accuracy
Focuses on resolving issues related to incomplete cuts, low precision, or poor finish.
- How to adjust the camera if the accuracy is not high - X Series
- Poor processing effect - X Series
- Material cannot be cut through - X Series
- How to apply and fine-tune your scanning offset settings - X Series
- Cutting produces multiple offset lines - X Series
- Kerf widening, dark engraving, and blurred edges: addressing defocus issues - X Series
- Broken or intermittent lines during cutting or scanning - X Series
- Random stray lines appearing during processing - X Series
- Displaced processing & laser head offset - X Series
¶ Optical Path & Laser Source
Resolving issues related to the laser beam and its path.
- Laser head without red dot indication - X series
- Red dot pointer misalignment with laser beam - X Series
- RF tube fails to fire (no laser output) - X Series
- Beam path misalignment - X Series
- Increased flaming during processing as machine usage increases - X Series
- Double beam spots in optical path - X Series
- When a 2.5″ Lens Is Installed in a 2″ Position: A Hidden Optical Misalignment That Affects Cutting Quality and Motion Accuracy - X Series
¶ Control System & Connectivity
Focuses on resolving screen interface, communication, and network connection issues.
- Touchscreen get stucked after turning on - X Series
- How to solve if the touchscreen is Chinese - -X Series
- Wifi cannot connect - X Series
- USB cable cannot connect - X Series
- Network cable cannot connect - X Series
¶ Hardware & Power Supply
Focuses on resolving machine power-on failures and auxiliary component issues.
- Power On Failure - X Series
- Built-in air pump is not working - X Series
- Auto-focus failure - X Series
- Y-axis guide wheel misalignment - X Series
¶ Instruction
- X Series Firmware Upgrade Tutorial
- How to Fill Water Tanks
- How to Test the Optimal Focal Length
- How to adjust the air pipe screw
- How to switch between different focusing lenses
- How to adjust the backlash parameters
- Touchscreen Function Introduction
- How to adjust the laser light path
- How to connect external blower
- How to Focus
- How to Use the Rotary
- How to Use the Camera
- Machine Base of X Series
- How to switch between different focus lenses
- How to Install X-axis Slider - X Series
¶ Part Replacement
- Laser power supply replacement
- Control card replacement
- Laser replacement
- Replace the control panel
- Replace the air tube dust protection kit
- Replace the magnet hinges on the X-Base
- Replace the air pump
- X-axis motor replacement
- Y-axis motor replacement
- Camera replacement
- How to maintain and replace beam mirrors